REVISION HISTORY 23 Inch Interactive Smart Shelf (ISS) Model: LD230EKS-FPN1/LD230EKS-FPN2 CMMI ID：2020DJ12750 Product manual (V1.0) Please read the manual carefully in order to use the ISS well. （In the following we will refer to this product collectively as ISS） Version Date Ver 1.
. . . . . • Please read the following instructions carefully before using ISS. . 1. Safety notice DIRECTORY • DO NOT use ISS near water or install in a high temperature envi ronment 2. ISS Components Check the following items in the box. If any attachments ar e missing, contact your local dealer where you purchased t he ISS. Illustrations in this manual may differ from actual IS Ss and projects. • DO NOT use ISS near water or install in a high-humidity environ ment 1. Safety notice ...................
. Pre-installation Instructions 5. ISS details Unpack Introduction to external interface Please check the packaging first before unpack ISS. Prepare a flat and stable surface near a wall outlet. Set the ISS box in an upright position according to the arrow markings on the outside of the ISS box. The following image and table show the location of the connectors and other components. Interface DC PWR IN procedure 1.Open the ISS box from the top side. 2.The top picture of the package is as below. 3.
Connect to Internet After powering on the ISS, you must follow the steps below to connect the ISS to the wireless router: 1. Select the "All Applications" button on the right side of the main screen to enter the "All Applic ations" menu or swipe up from the bottom edg e of the screen. (As shown in Figure 1) 2. Select “Setting” in the "All Applications" list. (A s shown Figure 2） 3. Select "WLAN" in the "Settings" menu area. (A s shown in Figure 6） 4. Make sure the WLAN switch is enabled.
8. FCC WARNING Appendix This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: NOTE: The following is the description of the ISS parameters for reference only. If you have any questions, please contact the supplier. (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
DECLARATION OF CONFORMITY -. Number : DoC_LD230EKS_FPN1-01 -. Name & address of the Manufacturer : LG Display Co., Ltd. LG Twin Tower, 128, Yeoui-daero, Yeongdeungpo-gu, Seoul 07336, Republic of Korea This declaration of conformity is issued under the sole responsibility of the manufacturer -.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
