User's Manual

75mm
110mm
70*110mm
正反印刷，风琴折
Sockets and Function Keys:
⑩ ⑧⑨ ⑦
AUX
DC 5V
USB
TF
①.Power/Handsfree
②.LED Indicator Function
③.Mode Switch
④.Pause/Play&TWS
⑤.Volume Up/Next Track
⑥.Volume Down/Previous Track
⑦.USB charging slot
⑧.USB lnterface
⑨.Microphone
⑩.AUX Input
.TF card slot
Operational Guide:
1. Connecting the speaker to your Device
Turn on the speaker, it will automatically enters pairing
mode.
If the unit has been paired with your device previously,
it will automatically search and connect to that device.
If no device has been paired before, upon being turned
on, the unit will enter pairing mode.
To pair the speaker to your device, turn on the bluetooth
setting on your device and search for nearby devices.
Select “LFS-OCEAN" in the list of available devices.
If your device requires a password,enter 0000.
Once successfully paired, you should hear "Connected"
voice prompt.
You may only connect the speaker to one device at a time.
2.True Wireless Stereo (TWS)
Under bluetooth mode,
To Pair - Press and hold Pause/Play button for 3 seconds
To Unpair - Press and hold Pause/Play button for 3 seconds
To pair two ‘’LFS-OCEAN" together, first ensure both
speakers are turned on.
Press and hold Pause/Play button for 3 seconds on either
speaker to enter TWS Pairing mode. Pairing should take a
few seconds.
Once pairing is successful,you will hear “connected".
To disconnect TWS, Press and hold the Pause/Play button
for 3 seconds.You should hear "Disconnected".
Note:
1.This TWS function is based on two speaker using together,
only one speaker cannot realize it,you need to buy another
one.
2.lf you have paired one speaker before, there will be a
"LFS-OCEAN" shown on your bluetooth setting.if you cannot
connect the twin speaker 'LFS-OCEAN", please delete the
earlier"LFS-OCEAN" on your bluetooth setting , tum off the
bluetooth on your mobile device and tum on again ,after
two speaker connected with each other,search for new
"LFS-OCEAN" on the bluetooth setting and make a pair, then
the mobile device will oonnect with twin speaker, the twin
speaker can play music sync.
Specifications:
Material: ABS Plastic+ Metal
Charging Voltage: DC5V
Frequency: 100Hz - 20KHz
Operation Range: 33feet / 10m
Package Includes:
Bluetooth speaker
USB charging cable
Audio Cable
User Manual
Lanyard
Important Safety Instructions:
1.Please store and use product in room temperature.
2.Do not drop or bump the product.
3.Do not disassemble, modify or attempt to repair the
product on your own.
4.Please use the rated voltage to charge your speaker.
5.Avoid playing music at high volume for long periods of
time as it may cause hearing damage,
6.Diassembling this product will void the warranty.
Usage Tips:
1.Make sure your phone, tablet, laptop or other desktop
device is bluetooth- enabled.
2.The operational range of the speaker may be influenced
by obstructions like walls,pillars, etc. To ensure a stable
connection, we recommend avoiding such obstructions
whenever possible and/or shortening the distance during
use.
3.Power off the speaker when not in use .
4.The speaker will send alert when the battery voltage is
low.
5.Exceptions may occur when misoperation happens or
the battery is too low. Please fully charge battery and turn
on the on/off button to reset.
1. Power/Handsfree Button
Power ON/OFF - Press and hold for 3 seconds
Answer Call - Press once to Answer/ End Call
Call - Press twice to call the most recent number
2. Mode Button
Switch between 3 modes - Micro SD Card（TF card), AUX in,
USB, and Bluetooth
3.Play/Pause
Press once to Play/Pause
4. Volume Up/ Next Track Button
Next Track - Press and hold
Volume Up - Press Once
5.Volume Down/ Previous Track Button
Previous Track - Press and hold
Volume Down - Press Once
11
11
M
①②③④⑤⑥
Wirelessly
stream your music
over Bluetooth
User manual
FCC IC warning statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Caution: Any changes or modifcations to this device not
explicitly approved by manufacturer could void your
authority to operate this equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
FCC-ID:2AAOSFLS-164