Installation Instructions

CLEANING AND MAINTENANCE
1. The bathtub is usually cleaned with general liquid detergent and
soft cloth, do not use the detergent that contains acetone or
ammonia water element. When you disinfect the bathtub, please use
disinfectant without formaldehyde
2. Surface stain can be rubbed with toothpaste on soft cloth.
3. For the mild abrasions or burns on the surface, you can use wet
No.2000 waterproof abrasive paper to polish this area, then buffing
the ground where it is polished
4. Wipe the dirt on the electroplating parts with a soft cloth. Do not
use coarse cloth or thinner to wipe it.
5. It is strictly forbidden to strike the bathtub with sharp hard objects.