Installation Instructions

Installation Tools Needed
W irin g d ia g ra m fo r in p u t te rm in a l
Drill Screwdriver
Hammer
MAIN SUPPLY
Measuring Tape
Level
CAUTION:
During operation of this product, never use hard or sharp objects directly against the mirror
surface, as it may result in damage and/or personal injury. Clean the product with a soft
cloth and mild detergent only. Do not use abrasives, chemical cleaners, or leave any
solutions on the surface such as soup, shampoo, etc. as they may damage the mirror.
①
②
③
⑤
⑥
④
A
B
E
F
⑧
⑨
⑦
AB
C1
F
F
E
DC2
Green
live
neutral
White
Black
Green
White
Black
AB
E
C1
C2
D
Installation Instructions for LED Medicine Cabinet
Note: To ensure general use of this product please follow the installation
instructions carefully. Must be installed indoors and on a suitable load bearing
wall.Installation should be done by a licensed contractor and/or electrician.
Only a clean soft cloth should be used to clean this product.
ground
ground
MAIN SUPPLY
Bluetooth speaker (optional function)
LED Strip
Bluetooth (optional function)
Constant-voltage power
Defogger (optional function)
Transfer relay for Defogger
Installation Instructions:
Fig①: Unpack the "E" and "F" mounting brackets.
Fig②: Install the "F" bracket using the "A" anchor and "B”. Make sure the "F" bracket is in the horizontal position.
Fig③: Lift the medicine cabinet and securely place in the "F" bracket as shown in the illustration.
Fig④: Hold the cabinet in the upright position and securely fasten the "E” bracket in the grove on top of the cabinet.
Fig⑤: Use "A" anchor and "B" screw through the mounting hole to secure the "E" bracket to the wall.
Fig⑦: Insert the provided shelf clips (C1/C2/D) into the round holes on both sides of the cabinet.
Fig⑧: After installing the shelf clips, insert the glass shelve(s).