Installation Manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 3 of 3
EEI –1381/815 CHAIR
Bx4 Ex4 Dx4
STEP 3:
Insert 1 piece of Front Leg (3) into the upper hole on bottom of the Chair Back (1) as shown.
Attach by 2 pieces of Bolt (B), 2 pieces of Spring Washer (D) and 2 piece of Flat Washer (E) as shown.
Repeat the same steps for the remaining Front Leg (3).
Do not fully tighten Bolts (B) for either leg.
Hardware & Tool required
3
B
3
D
E
2
1
Assembly is completed. The chair is ready to use now!
Fx1
Hardware & Tool required
Carefully turn over the chair.
Please put a heavy object or seat one adult on top of the Seat Frame (2) to pressure the chair for leveling.
Fully tighten the Bolts (A&B&C) with Allen Wrench (F).
Cover the leather on back of the Seat Frame (2) by Velcro.
STEP 3:
F