Installation Manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 3
EEI –1381/815 CHAIR
STEP 1:
STEP 2:
Attach Seat Frame (2) to Chair Back (1) by 4 pieces of Bolt (C), 4 pieces of Spring Washer (D) and 4 pieces of
Flat Washer (E) as shown.
Do not fully tighten Bolts (C) at this step also.
2
Ax1 Dx1 Ex1
Hardware & Tool required
A
E
D
Cx4 Ex4 Dx4
Hardware & Tool required
1
2
E
D
C
1
Please put Chair Back (1) upside down on a carpeted or padded area.
Then open the black fabric which is attached by the Velcro from back to front on bottom of the Seat Frame (2). The inside of
the Seat Frame(2) will now be visible.
Attach Seat Frame (2) to Chair Back(1) by using 1 piece of Bolt (A), 1 piece of Spring Washer (D) and 1 piece of Flat
Washer (E) as shown.
Do not fully tighten Bolt (A) at this step.