Installation Manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 2

EEI –2222/2223 CHAIR

STEP 1:

STEP 2:

Please put the Chair Body (1) upside down on a carpeted or padded area.

Then open the zipper on the bottom of Chair Body (1), to make the inside of the Chair Body(1) fully visible.

Please find Legs (2&3) package and hardware package inside of the Seat Chair Body (1).

Insert 1 piece of Front Leg (2) into the left upper hole on bottom of the Chair Body (1) as shown.

Attach by using 2 pieces of Bolt (A), 2 pieces of Spring Washer (B) and 2 pieces of Flat Washer (C).

Repeat the same steps for the remaining Front Leg (2) and Back Leg (3).

Do not fully tighten Bolts (B) for either leg.

Ax8 Cx8

Bx8

Legs Package

Hardware & Tool required

Assembly is completed. The chair is ready to use now!

Dx1

Carefully turn over the dining chair.

Close the zipper on bottom of the Chair Body (1).

Please put a heavy object or seat one adult on top of the Chair Body (1) to pressure the chair for leveling.

Fully tighten all Bolts (A) with Allen Wrench (D).

Hardware Package