User`s guide
Table Of Contents
- Contents
- Safety information
- Overview
- Selecting a location for the printer
- Additional printer setup
- Installing internal options
- Installing hardware options
- Setting up the printer software
- Networking
- Preparing to set up the printer on an Ethernet network
- Installing the printer on an Ethernet network
- Preparing to set up the printer on a wireless network
- Connecting the printer using the Wireless Setup Wizard
- Connecting the printer to a wireless network using the Wi-Fi Protected Setup
- Connecting the printer to a wireless network using the Embedded Web Server
- Verifying printer setup
- Using MS510dn and MS610dn
- Learning about the printer
- Loading paper and specialty media
- Printing
- Managing the printer
- Finding advanced networking and administrator information
- Checking the virtual display
- Configuring supply notifications from the Embedded Web Server
- Modifying confidential print settings
- Copying printer settings to other printers
- Creating a printer control panel PIN
- Printing a menu settings page
- Printing a network setup page
- Checking the status of parts and supplies
- Saving energy
- Restoring factory default settings
- Securing the printer
- Using MS610de
- Learning about the printer
- Setting up and using the home screen applications
- Loading paper and specialty media
- Printing
- Managing the printer
- Setting up serial printing
- Changing port settings after installing a new network Internal Solutions Port
- Finding advanced networking and administrator information
- Checking the virtual display
- Configuring supply notifications from the Embedded Web Server
- Modifying confidential print settings
- Copying printer settings to other printers
- Creating a printer control panel PIN
- Printing a menu settings page
- Printing a network setup page
- Checking the status of parts and supplies
- Saving energy
- Restoring factory default settings
- Securing the printer
- Paper and specialty media guide
- Understanding the printer menus
- Saving money and the environment
- Maintaining the printer
- Clearing jams
- Avoiding jams
- Understanding jam messages and locations
- [x]-page jam, open front door. [20y.xx]
- [x]-page jam, open rear door. [20y.xx]
- [x]-page jam, clear standard bin. [20y.xx]
- [x]-page jam, remove tray 1 to clear duplex. [23y.xx]
- [x]-page jam, open tray [x]. [24y.xx]
- [x]-page jam, clear manual feeder. [25y.xx]
- Troubleshooting
- Understanding the printer messages
- Cartridge, imaging unit mismatch [41.xy]
- Cartridge low [88.xy]
- Cartridge nearly low [88.xy]
- Cartridge very low, [x] estimated pages remain [88.xy]
- Change [paper source] to [custom type name] load [orientation]
- Change [paper source] to [custom string] load [paper orientation]
- Change [paper source] to [paper size] load [orientation]
- Change [paper source] to [paper type] [paper size] load [orientation]
- Close front door
- Complex page, some data may not have printed [39]
- Configuration change, some held jobs were not restored [57]
- Defective flash detected [51]
- Error reading USB drive. Remove USB.
- Error reading USB hub. Remove hub.
- Imaging unit low [84.xy]
- Imaging unit nearly low [84.xy]
- Imaging unit very low, [x] estimated pages remain [84.xy]
- Incorrect paper size, open [paper source] [34]
- Insert Tray [x]
- Insufficient memory to support Resource Save feature [35]
- Insufficient memory to collate job [37]
- Insufficient memory for Flash Memory Defragment operation [37]
- Insufficient memory, some Held Jobs were deleted [37]
- Insufficient memory, some held jobs will not be restored [37]
- Load [paper source] with [custom string] [paper orientation]
- Load [paper source] with [custom type name] [paper orientation]
- Load [paper source] with [paper size] [paper orientation]
- Load [paper source] with [paper type] [paper size] [paper orientation]
- Load manual feeder with [custom type name] [paper orientation]
- Load manual feeder with [custom string] [paper orientation]
- Load manual feeder with [paper size] [paper orientation]
- Load manual feeder with [paper type] [paper size] [paper orientation]
- Maintenance kit low [80.xy]
- Maintenance kit nearly low [80.xy]
- Maintenance kit very low, [x] estimated pages remain [80.xy]
- Memory full [38]
- Network [x] software error [54]
- Non-Lexmark [supply type], see User’s Guide [33.xy]
- Not enough free space in flash memory for resources [52]
- Printer had to restart. Last job may be incomplete.
- Reinstall missing or unresponsive cartridge [31.xy]
- Reinstall missing or unresponsive imaging unit [31.xy]
- Remove paper from standard output bin
- Replace cartridge, 0 estimated pages remain [88.xy]
- Replace cartridge, printer region mismatch [42.xy]
- Replace imaging unit, 0 estimated pages remain [84.xy]
- Replace maintenance kit, 0 estimated pages remain [80.xy]
- Replace unsupported cartridge [32.xy]
- Replace unsupported imaging unit [32.xy]
- Serial option [x] error [54]
- SMTP server not set up. Contact system administrator.
- Standard network software error [54]
- Standard parallel port disabled [56]
- Standard USB port disabled [56]
- Too many flash options installed [58]
- Too many trays attached [58]
- Unformatted flash detected [53]
- Unsupported option in slot [x] [55]
- Weblink server not set up. Contact system administrator.
- Solving printer problems
- Solving print problems
- Printing problems
- Multiple-language PDF files do not print
- Error message about reading the flash drive appears
- Print jobs do not print
- Confidential and other held jobs do not print
- Print job takes longer than expected
- Job prints from the wrong tray or on the wrong paper
- Incorrect characters print
- Tray linking does not work
- Large jobs do not collate
- Unexpected page breaks occur
- Print quality problems
- Characters have jagged or uneven edges
- Clipped pages or images
- Shadow images appear on prints
- Gray background on prints
- Incorrect margins on prints
- Paper curl
- Print irregularities
- Repeating defects appear on prints
- Print is too dark
- Print is too light
- Printer is printing blank pages
- Skewed print
- Printer is printing solid black pages
- Transparency print quality is poor
- Streaked horizontal lines appear on prints
- Streaked vertical lines appear on prints
- Horizontal voids appear on prints
- Vertical voids appear on prints
- Toner specks appear on prints
- Toner fog or background shading appears on prints
- Toner rubs off
- Uneven print density
- Printing problems
- Solving home screen applications problems
- Embedded Web Server does not open
- Contacting customer support
- Understanding the printer messages
- Notices
- Product information
- Edition notice
- GOVERNMENT END USERS
- Trademarks
- Federal Communications Commission (FCC) compliance information statement
- Modular component notice
- Licensing notices
- Noise emission levels
- Waste from Electrical and Electronic Equipment (WEEE) directive
- Product disposal
- Taiwan waste dry cell batteries recycle logo notice
- Static sensitivity notice
- ENERGY STAR
- Temperature information
- Laser notice
- Laser advisory label
- Power consumption
- European Community (EC) directives conformity
- Regulatory notices for wireless products
- Exposure to radio frequency radiation
- Industry Canada (Canada)
- Notice to users in the European Union
- STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...
- Patent acknowledgment
- Index
printer
basic model 35
configurations 67
minimum clearances 10, 11
moving 10, 11, 174, 175
selecting a location 10, 11
shipping 175
printer configurations 35
basic model 67
configured model 67
printer control panel 36, 68
adjusting brightness 63
factory defaults, restoring 64, 104
indicator light 37, 68
Sleep button light 37, 68
using 36
printer control panel PIN
creating 58, 99
printer control panel, virtual
display
using the Embedded Web
Server 56, 97
Printer had to restart. Last job may
be incomplete. 195
printer hard disk
disposing of 105
encrypting 107
installing 22
removing 25
wiping 106
printer hard disk encryption 107
printer hard disk memory
erasing 106
printer information
where to find 8
printer is printing blank pages 222
printer messages
[x]‑page jam, clear standard bin.
[20y.xx] 183
[x]‑page jam, open rear door.
[20y.xx] 182
[x]‑page jam, open tray [x].
[24y.xx] 185
Cartridge low [88.xy] 188
Cartridge nearly low [88.xy] 188
Change [paper source] to [custom
string] load [paper
orientation] 189
Change [paper source] to [custom
type name] load
[orientation] 188
Change [paper source] to [paper
size] load [orientation] 189
Change [paper source] to [paper
type] [paper size] load
[orientation] 189
Close front door 189
Complex page, some data may not
have printed [39] 189
Configuration change, some held
jobs were not restored [57] 189
Defective flash detected [51] 190
Error reading USB drive. Remove
USB. 190
Error reading USB hub. Remove
hub. 190
Imaging unit low [84.xy] 190
Imaging unit nearly low
[84.xy] 190
Incorrect paper size, open [paper
source] [34] 191
Insert Tray [x] 191
Insufficient memory for Flash
Memory Defragment operation
[37] 191
Insufficient memory to collate job
[37] 191
Insufficient memory to support
Resource Save feature [35] 191
Insufficient memory, some Held
Jobs were deleted [37] 191
Insufficient memory, some held
jobs will not be restored
[37] 192
Load [paper source] with [custom
string] [paper orientation] 192
Load [paper source] with [custom
type name] [paper
orientation] 192
Load [paper source] with [paper
size] [paper orientation] 192
Load [paper source] with [paper
type] [paper size] [paper
orientation] 193
Load manual feeder with [custom
string] [paper orientation] 193
Load manual feeder with [custom
type name] [paper
orientation] 193
Load manual feeder with [paper
size] [paper orientation] 193
Load manual feeder with [paper
type] [paper size] [paper
orientation] 194
Maintenance kit low [80.xy] 194
Maintenance kit nearly low
[80.xy] 194
Memory full [38] 194
Network [x] software error
[54] 194
Non‑Lexmark [supply type], see
User’s Guide [33.xy] 195
Not enough free space in flash
memory for resources [52] 195
Printer had to restart. Last job
may be incomplete. 195
Reinstall missing or unresponsive
cartridge [31.xy] 196
Reinstall missing or unresponsive
imaging unit [31.xy] 196
Remove paper from standard
output bin 196
Replace cartridge, 0 estimated
pages remain [88.xy] 196
Replace cartridge, printer region
mismatch [42.xy] 196
Replace imaging unit, 0 estimated
pages remain [84.xy] 197
Replace maintenance kit, 0
estimated pages remain
[80.xy] 197
Replace unsupported cartridge
[32.xy] 197
Replace unsupported imaging unit
[32.xy] 197
Serial option [x] error [54] 197
SMTP server not set up. Contact
system administrator. 198, 199
Standard network software error
[54] 198
Standard parallel port disabled
[56] 198
Standard USB port disabled
[56] 198
Too many flash options installed
[58] 198
Too many trays attached [58] 199
Unformatted flash detected
[53] 199
Unsupported option in slot [x]
[55] 199
Unsupported USB hub, please
remove 190
Index 252