- 4232 Printer 302 User's Guide

1. Turn the power Off (O).
2. Wait 10 seconds, then turn the power On (|).
3. If the printer displays this status code again, or if the printer
displays
call for service.
1. Press Stop.
2. Press Cancel Print.
3. Check that the serial configuration parameters are set correctly.
4. Press Start.
5. If the status code occurs again, call for service.
ð19 PRINTER BOARD FAILURE
SEE USER'S GUIDE
ð66 PRINTER BOARD FAILURE
SEE USER'S GUIDE
ð21 RECEIVE BUFFER OVERRUN
PRESS STOP THEN CANCEL PRINT
ð23 TRANSMIT BUFFER OVERRUN
PRESS STOP THEN CANCEL PRINT
ð24 PARITY ERROR
PRESS STOP THEN CANCEL PRINT
ð25 FRAMING ERROR
PRESS STOP THEN CANCEL PRINT
B-10 User’s Guide Model 302