Quick Reference Guide

3 Finisher bin 2

Note: Finisher bin 2 is available only when a booklet finisher is

installed.

Note: Make sure all paper fragments are removed.

Paper jam in door H

1 Open door H.

Note: Door H is located between the finisher exit bins.

2 Firmly grasp the jammed paper on each side, and then gently pull

it out.

Note: Make sure all paper fragments are removed.

3 Close door H.

4 If necessary, touch Continue from the printer control panel.

Paper jam in door G

1 Open door G.

Area Cover, knob, or handle name

1 Cover G1

2 Cover G2

3 Knob G3

4 Cover G4

Area Cover, knob, or handle name

5 Cover G7

6 Knob G8

7 Handle G9

2 Lift cover G1 lever.

3 Firmly grasp any jammed paper, and then gently pull it out.

Note: Make sure to remove all paper fragments after gently

pulling out any jammed paper inside door G.

4 Move cover G2 to the right, and then remove any jammed paper.

Note: If the paper is jammed in the rollers, then rotate knob G3

counterclockwise.

5 Move cover G4 down, and then remove any jammed paper.

6 Move cover G7 to the left, and then remove any jammed paper.

7 Pull handle G9 until the tray is completely open.