Quick Reference Guide

4 Open Door A by pushing the release latch up and lowering the
door.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
5 Pull the jam up and toward you.
Note: If the jam does not move immediately, stop pulling.
Push down and pull the green lever to make it easier to remove
the jam. Make sure all paper fragments are removed.
6 Close Door A.
24x paper jam
Jam in Tray 1
1 Remove Tray 1 from the printer.
2 Remove the jam.
3 Insert Tray 1.
If all jams are cleared, then the printer resumes printing.
Clearing Area A
1 Open Door A by pushing the release latch up and lowering the
door.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
6