Quick Reference Guide

To lock, slide the button to the right when a length has been

selected.

4 Flex the sheets back and forth to loosen them. Do not fold or crease

the paper. Straighten the edges on a level surface.

5 Load the paper stack toward the back of the tray with the

recommended printable side faceup.

Notes:

• When loading preprinted letterhead for one‑sided printing,

place the header faceup toward the front of the tray.

• When loading preprinted letterhead for two‑sided printing,

place the header facedown toward the rear of the tray.

One‑sided printing Two‑sided (Duplex) printing

LETTERHEAD

Note: Make sure paper does not exceed the maximum paper fill

indicator located on the left side of the tray.

Warning—Potential Damage: Overloading the tray can cause

paper jams and possible printer damage.

6 Insert the tray.

7 From the printer control panel, verify the paper size and paper type

setting for the tray based on the paper you loaded.

Loading the optional 550‑sheet special

media tray

The optional 550‑sheet special media tray (Tray 2) supports narrow

paper sizes such as envelopes and A6.