Quick Reference Guide

4 Push the length guide release latch to raise the length guide. Slide

the guide to the correct position for the paper size you are loading,

and then lock the guide.

5 Flex the sheets back and forth to loosen them. Do not fold or crease

the paper. Straighten the edges on a level surface.

6 Load the paper stack:

• Printable side faceup for one‑sided printing

• Printable side facedown for two‑sided printing

One‑sided printing Two‑sided printing

LETTERHEAD

• Make sure paper does not exceed the maximum paper fill

indicator located on the side of the tray.

Warning—Potential Damage: Overloading the tray may

cause paper jams and possible printer damage.

7 Insert the tray.

Loading the multipurpose feeder

The multipurpose feeder can hold approximately:

• 100 sheets of 75‑g/m

(20‑lb) paper

• 10 envelopes

• 75 transparencies

Note: Do not add or remove paper or specialty media while the

printer prints from the multipurpose feeder or when the printer

control panel indicator light is blinking. Doing so may cause a jam.

LTR&LG

EXEC A5

1 Maximum paper fill indicator

2 Tray release latch

3 Paper release lever

4 Paper size indicators

5 Paper width guide

6 Width guide release tab