Quick Reference Guide

2 For paper or specialty media that is longer than letter-size paper,
gently pull the extension until it is fully extended.
3 Flex the sheets of paper or specialty media back and forth to loosen
them. Do not fold or crease them. Straighten the edges on a level
surface.
Paper
Envelopes
Transparencies
Note: Avoid scratching or touching the print side.
4 Push the paper pick tab, and then load the paper or specialty media.
Slide the stack gently into the multipurpose feeder until it comes
to a stop, and then release the paper pick tab.
Warning—Potential Damage: Pulling the paper out, without
pushing the paper pick tab first, may cause jams or the paper
pick tab to break.
• Load paper and transparencies with the recommended print
side facedown and the long edge entering the printer first.
• For duplex letterhead printing, place the letterhead faceup and
the header entering the printer last.
• Load envelopes with the flap side up and to the right.
Warning—Potential Damage: Never use envelopes with
stamps, clasps, snaps, windows, coated linings, or self‑stick
adhesives. These envelopes may severely damage the
printer.
Notes:
• Do not exceed the maximum stack height by forcing paper or
transparencies under the stack height limiter.
• Load only one size and type of paper at a time.
8