Quick Reference Guide

Notice the size indicators at the bottom of the tray. Use these
indicators to help position the length and width guides.
2 Squeeze and then slide the width guide to the correct position for
the paper size loaded.
3 Squeeze and then slide the length guide to the correct position for
the paper size loaded.
Note: The length guide has a locking device. To unlock, slide the
button on top of the length guide down. To lock, slide the
button up when a length has been selected.
4 Flex the sheets back and forth to loosen them. Do not fold or crease
the paper. Straighten the edges on a level surface.
5 Load the paper stack with the recommended print side faceup.
Notes:
• Place print side facedown for duplex printing.
• Place pre-punched paper with the holes toward the front of
the tray.
• Place letterheads with the header on the left side of the tray.
• Make sure the paper is below the maximum fill line located
on the edge of the paper tray.
Warning—Potential Damage: Overloading the tray can cause
paper jams and possible printer damage.
6 Insert the tray.
7 From the printer control panel, verify the Paper Size and Paper Type
setting for the tray based on the paper you loaded.
Loading the optional 850‑ and
1,150‑sheet trays
The 850‑ and 1,150‑sheet trays support the same paper sizes and
types, and require the same process for loading paper.
5