User's Manual
Table Of Contents
- Contents
- Safety information
- Learning about the printer
- Understanding the printer control panel
- Setting up and using the home screen applications
- Additional printer setup
- Installing internal options
- Installing hardware options
- Setting up the printer software
- Attaching cables
- Networking
- Preparing to set up the printer on an Ethernet network
- Installing the printer on an Ethernet network
- Preparing to set up the printer on a wireless network
- Connecting the printer using the Wireless Setup Wizard
- Connecting the printer to a wireless network using Wi-Fi Protected Setup
- Connecting the printer to a wireless network using the Embedded Web Server
- Changing port settings after installing a new network Internal Solutions Port
- Setting up serial printing
- Verifying printer setup
- Loading paper and specialty media
- Paper and specialty media guide
- Printing
- Copying
- E-mailing
- Faxing
- Setting up the printer to fax
- Sending a fax
- Creating shortcuts
- Customizing fax settings
- Canceling an outgoing fax
- Holding and forwarding faxes
- Understanding the fax options
- Scanning
- Understanding the printer menus
- Saving money and the environment
- Securing the printer
- Maintaining the printer
- Managing the printer
- Clearing jams
- Avoiding jams
- Understanding jam messages and locations
- [x]-page jam, open front door. [20y.xx]
- [x]-page jam, open rear door. [20y.xx]
- [x]-page jam, clear standard bin. [20y.xx]
- [x]-page jam, remove tray 1 to clear duplex. [23y.xx]
- [x]-page jam, open tray [x]. [24y.xx]
- [x]-page jam, clear manual feeder. [25y.xx]
- [x]-page jam, open automatic feeder top cover. [28y.xx]
- Troubleshooting
- Understanding printer messages
- Cartridge low [88.xy]
- Cartridge nearly low [88.xy]
- Cartridge very low, [x] estimated pages remain [88.xy]
- Change [paper source] to [custom string] load [paper orientation]
- Change [paper source] to [custom type name] load [orientation]
- Change [paper source] to [paper size] load [orientation]
- Change [paper source] to [paper type] [paper size] load [orientation]
- Close flatbed cover and load originals if restarting job [2yy.xx]
- Close front door
- Configuration change, some held jobs were not restored [57]
- Complex page, some data may not have printed [39]
- Defective flash detected [51]
- Disk must be formatted for use in this device
- Error reading USB drive. Remove USB.
- Error reading USB hub. Remove hub.
- Fax memory full
- Fax partition inoperative. Contact system administrator.
- Fax server 'To Format' not set up. Contact system administrator.
- Fax Station Name not set up. Contact system administrator.
- Fax Station Number not set up. Contact system administrator.
- Imaging unit low [84.xy]
- Imaging unit nearly low [84.xy]
- Imaging unit very low, [x] estimated pages remain [84.xy]
- Incorrect paper size, open [paper source] [34]
- Insufficient memory for Flash Memory Defragment operation [37]
- Insufficient memory, some Held Jobs were deleted [37]
- Insufficient memory, some held jobs will not be restored [37]
- Insufficient memory to collate job [37]
- Insufficient memory to support Resource Save feature [35]
- Load manual feeder with [custom string] [paper orientation]
- Load manual feeder with [custom type name] [paper orientation]
- Load manual feeder with [paper size] [paper orientation]
- Load manual feeder with [paper type] [paper size] [paper orientation]
- Load [paper source] with [custom string] [paper orientation]
- Load [paper source] with [custom type name] [paper orientation]
- Load [paper source] with [paper size] [paper orientation]
- Load [paper source] with [paper type] [paper size] [paper orientation]
- Maintenance kit low [80.xy]
- Maintenance kit nearly low [80.xy]
- Maintenance kit very low, [x] estimated pages remain [80.xy]
- Memory full [38]
- Memory full, cannot print faxes
- Memory full, cannot send faxes
- Network [x] software error [54]
- No analog phone line connected to modem, fax is disabled.
- Non-Lexmark [supply type], see User’s Guide [33.xy]
- Not enough free space in flash memory for resources [52]
- Printer had to restart. Last job may be incomplete.
- Reinstall missing or unresponsive cartridge [31.xy]
- Reinstall missing or unresponsive imaging unit [31.xy]
- Remove paper from standard output bin
- Replace all originals if restarting job.
- Replace cartridge, 0 estimated pages remain [88.xy]
- Replace cartridge, printer region mismatch [42.xy]
- Replace defective imaging unit [31.xy]
- Replace imaging unit, 0 estimated pages remain [84.xy]
- Replace jammed originals if restarting job.
- Replace maintenance kit, 0 estimated pages remain [80.xy]
- Replace unsupported cartridge [32.xy]
- Replace unsupported imaging unit [32.xy]
- Restore held jobs?
- Scanner automatic feeder cover open
- Scanner disabled by admin [840.01]
- Scanner disabled. Contact system administrator if problem persists. [840.02]
- Scanner jam, remove all originals from the scanner [2yy.xx]
- Scanner jam, remove jammed originals from the scanner [2yy.xx]
- Serial option [x] error [54]
- SMTP server not set up. Contact system administrator.
- Some held jobs were not restored
- Standard network software error [54]
- Standard USB port disabled [56]
- Supply needed to complete job
- Too many flash options installed [58]
- Too many trays attached [58]
- Unformatted flash detected [53]
- Weblink server not set up. Contact system administrator.
- Solving printer problems
- Solving print problems
- Printing problems
- Multiple-language PDF files do not print
- Error message about reading the flash drive appears
- Print jobs do not print
- Confidential and other held jobs do not print
- Print job takes longer than expected
- Printing slows down
- Job prints from the wrong tray or on the wrong paper
- Incorrect characters print
- Tray linking does not work
- Large jobs do not collate
- Unexpected page breaks occur
- Print quality problems
- Characters have jagged or uneven edges
- Printer is printing blank pages
- Clipped pages or images
- Compressed images appear on prints
- Shadow images appear on prints
- Gray background on prints
- Incorrect margins on prints
- Paper curl
- Print irregularities
- Repeating defects appear on prints
- Print is too dark
- Print is too light
- Skewed print
- Printer is printing solid black pages
- Transparency print quality is poor
- Streaked horizontal lines appear on prints
- Streaked vertical lines appear on prints
- Horizontal voids appear on prints
- Vertical voids appear on prints
- Toner specks appear on prints
- Toner fog or background shading appears on prints
- Toner rubs off
- Uneven print density
- Printing problems
- Solving copy problems
- Solving fax problems
- Solving scanner problems
- Solving home screen applications problems
- Embedded Web Server does not open
- Contacting customer support
- Understanding printer messages
- Notices
- Product information
- Edition notice
- GOVERNMENT END USERS
- Trademarks
- Federal Communications Commission (FCC) compliance information statement
- Noise emission levels
- Temperature information
- Waste from Electrical and Electronic Equipment (WEEE) directive
- Product disposal
- Static sensitivity notice
- ENERGY STAR
- Laser notice
- Laser advisory label
- Power consumption
- Licensing notices
- European Community (EC) directives conformity
- Regulatory notices for telecommunication terminal equipment
- Notice to users of the US telephone network: FCC requirements
- Notice to users of the Canadian telephone network
- Notice to users of the New Zealand telephone network
- Notice to Users in the European Union
- Regulatory notices for wireless products
- Modular component notice
- Exposure to radio frequency radiation
- Notice to users in Brazil
- Industry Canada (Canada)
- Taiwan NCC RF notice statement
- Notice to users in the European Union
- STATEMENT OF LIMITED WARRANTY FOR LEXMARK LASER PRINTERS, LEXMARK LED PRINTERS, AND LEXMARK MULTIFUN ...
- Patent acknowledgment
- Index
Index
Numerics
250‑sheet tray
installing 42
550‑sheet tray
installing 42
Symbols
[x]‑page jam, clear manual feeder.
[25y.xx] 237
[x]‑page jam, clear standard bin.
[20y.xx] 234
[x]‑page jam, open automatic
feeder top cover. [28y.xx] 238
[x]‑page jam, open front door.
[20y.xx] 230
[x]‑page jam, open rear door.
[20y.xx] 233
[x]‑page jam, open tray [x].
[24y.xx] 236
[x]‑page jam, remove tray 1 to clear
duplex. [23y.xx] 235
A
accessing the Embedded Web
Server 19
Active NIC menu 146
adapter plug 113
ADF
copying using 85
ADF separator roller
ordering 217
adjusting brightness
Embedded Web Server 207
printer control panel 207
adjusting copy quality 89
adjusting display brightness 207
adjusting Sleep mode 206
adjusting toner darkness 78
administrator settings
Embedded Web Server 224
advanced duplex
copy options 95
advanced imaging
copy options 96
e‑mail options 103
fax options 126
scan options 134
answering machine
setting up 106
AppleTalk menu 151
applications
understanding 20
attaching cables 46
available internal options 26
avoiding jams 74
avoiding paper jams 227
B
back button
printer control panel 14
blocking junk faxes 123
buttons, touch screen
using 16
C
cables
Ethernet 46
USB 46
canceling
print job, from computer 83
canceling a copy job 93
canceling a print job
from a computer 83
from the printer control panel 83
canceling an e-mail 101
cannot open Embedded Web
Server 301
Card Copy
setting up 21
card stock
loading, multipurpose feeder 62
tips 70
Cartridge low [88.xy] 240
Cartridge nearly low [88.xy] 240
Cartridge very low, [x] estimated
pages remain [88.xy] 240
Change [paper source] to [custom
string] load [paper orientation] 240
Change [paper source] to [custom
type name] load [orientation] 240
Change [paper source] to [paper
size] load [orientation] 241
Change [paper source] to [paper
type] [paper size] load
[orientation] 241
checking an unresponsive
printer 255
checking status of parts and
supplies 216
checking the status of parts and
supplies 216
checking the virtual display
using the Embedded Web
Server 224
cleaning
exterior of the printer 214
scanner glass 215
cleaning the printer 214
Close flatbed cover and load
originals if restarting job
[2yy.xx] 241
Close front door 241
collate
copy options 94
collating copies 90
Complex page, some data may not
have printed [39] 242
compressed images appear on
prints 271
confidential data
information on securing 213
confidential jobs
modifying print settings 82
confidential print jobs 81
printing from a Macintosh
computer 82
printing from Windows 82
Confidential Print menu 155
Configuration change, some held
jobs were not restored [57] 241
configuration information
wireless network 50
Configure MP menu 139
configuring
supply notifications, imaging
unit 225
supply notifications, maintenance
kit 225
supply notifications, toner
cartridge 225
configuring port settings 53
configuring supply notifications 225
Index 321