Quick Start Guide

4 Do either of the following to clear the message and continue

printing:

• For touch‑screen printer models, touch or Done.

• For non‑touch‑screen printer models, select Next > >

Clear the jam, press OK >

[x]‑page jam, open upper and lower rear

door. [231–234]

CAUTION—HOT SURFACE: The inside of the printer might be

hot. To reduce the risk of injury from a hot component, allow

the surface to cool before touching.

1 Pull down the rear door.

2 Firmly grasp the jammed paper on each side, and then gently pull

it out.

Note: Make sure all paper fragments are removed.

3 Close the rear door.

4 Push the back of the standard tray.

5 Press down the rear duplex flap, then firmly grasp the jammed

paper, and then gently pull the paper out.

Note: Make sure all paper fragments are removed.

6 Insert the standard tray.

7 Do either of the following to clear the message and continue

printing:

• For touch‑screen printer models, touch or Done.

• For non‑touch‑screen printer models, select Next > >

Clear the jam, press OK >

[x]‑page jam, remove standard bin

jam. [203]

1 Firmly grasp the jammed paper on each side, and then gently pull

it out.

Note: Make sure all paper fragments are removed.