Quick Start Guide

4 Prepare the paper or specialty media for loading.

• Flex sheets of paper back and forth to loosen them. Do not fold

or crease the paper. Straighten the edges on a level surface.

• Hold transparencies by the edges. Straighten the edges on a

level surface.

Note: Avoid touching the printable side of the

transparencies. Be careful not to scratch them.

• Flex the stack of envelopes back and forth to loosen them.

Straighten the edges on a level surface.

5 Load the paper or specialty media.

Note: Slide the stack gently into the multipurpose feeder until it

comes to a stop.

• Load only one size and type of paper or specialty media at a

time.

• Make sure the paper fits loosely in the multipurpose feeder,

lies flat, and is not bent or wrinkled.

• There are different ways of loading letterhead depending on

whether an optional staple finisher is installed or not.

Without an optional staple finisher With an optional staple finisher

ABC

One‑sided printing

ABC

One‑sided printing

Without an optional staple finisher With an optional staple finisher

ABC

Two‑sided (duplex) printing

• Load envelopes with the flap side down and on the left of the

multipurpose feeder.

EXE

Warning—Potential Damage: Never use envelopes with

stamps, clasps, snaps, windows, coated linings, or self‑stick

adhesives. These envelopes may severely damage the

printer.