Quick Start Guide

d Squeeze the length guide and slide it to the correct position for
the size of the paper being loaded until it clicks into place.
3 Flex the sheets back and forth to loosen them. Do not fold or crease
the paper. Straighten the edges on a level surface.
4 Load the paper stack with the printable side facedown.
Note: Make sure the paper is loaded properly.
• There are different ways for loading letterhead depending on
whether an optional staple finisher is installed or not.
Without an optional staple finisher With an optional staple finisher
ABC
One‑sided printing
ABC
One‑sided printing
A
B
C
Two‑sided printing
A
B
C
Two‑sided printing
• Make sure the paper is below the maximum paper fill indicator.
Warning—Potential Damage: Overfilling the tray can cause
paper jams.
5 Insert the tray.
Note: Press the paper stack down while inserting the tray.
16