Owners manual

A.4 For Direct Twinaxial Attachment

Hardware Compatibility

When the printer contains the optional Card for IPDS and SCS/TNe and the Adapter for SCS with a

twinaxial cable, the printer attaches to the following IBM hardware:

• iSeries

• AS/400e Servers and e-systems

• AS/400 Twinaxial Workstation Controllers

• 5494 Remote Control Unit

• 5394 Remote Control Unit

Note: There must be separate twinax addresses, one for the Adapter for SCS and another for the IPDS

emulation.

Software Compatibility

The IBM host software requirements for AFP/IPDS printing are as follows:

• AS/400 PSF/400 V3R1, V3R2, V3R6, V3R7, V4R1-R5, V5R1-R4 or greater

• AS/400 OS/400 V3R1, V3R2, V3R6, V3R7, V4R1-R5, V5R1-R4, or greater

• AS/400 OS/400 V3R6 with System Support Program (SSP) Release 7.5*

• AS/400 SSP Release 7.1*

* IPDS Advanced Function PRPQ is required