Owners manual

3.3.20 Trace Functions

This option determines if the Trace function is enabled. Trace data is sent to the selected port. Unless you

have a computer running a capture program attached to the port selected to receive the trace data, the

printer may hang BUSY. Print performance is degraded when the trace function is active.

Note: Port selections will only appear when the port is available on the printer. The Trace function is

used by service personnel for trouble shooting and service.

Disable*

Disable Trace

PAR Std. Output

Enable the standard parallel port for trace data output

PAR Slot 1 Out

Enable the optional parallel port in slot 1 for trace data output

PAR Slot 2 Out

Enable the optional parallel port in slot 2 for trace data output

USB Std. Output

Enable the standard USB port for trace data output

USB Slot 1 Out

Enable the optional USB port in slot 1 for trace data output

USB Slot 2 Out

Enable the optional USB port in slot 2 for trace data output

Note: This function can not be operated remotely.

3.3.21 IPDS Version

This option displays the current IPDS version / level.

Note 1: This option can not be used remotely.

Note 2: The IPDS level is also shown on the printed Menu Settings Page. It is found as “IPDS Emulation”

under the Device Information heading. See

Printing the Menu Settings Page (printers) on page 15

Printing the Menu Settings Page (MFPs) on page 18.