Owners manual

17
8. If you need to change multiple settings within the same menu – such as EMULATION, scroll
through the menu options and change the settings. When you touch
(Submit), all changes
will be saved.
9. When you are finished in this list of menu options, exit by touching
(Back) to return to the
previous menu level or
(Home) to return to the Ready state.
2.3.3 Example: Changing a Numerical Setting
Example: If you select Menus > Option Card Menu > IPDS MENU > MARGINS > TRAY1 >
ADJUST > Top Margin, you see the following on the screen:
Top Margin
0
Use the navigation icons,
 to decrease the value orto increase a value. Touch (Submit) to
save the desired value.
When the setting is saved, the screen will revert to the previous menu level.
Some numerical values contain more than one field. For example, Menus > Option Card Menu > IPDS
MENU > EMULATION > Default CPI.
 
Default CPI 10
. 0
 
The value before the decimal point and the value after the decimal point are set independently of each
other. Set each field independently using the
above the field and/or the below it.
2.3.4 Saved Option Changes Become Active on New Session
All saved settings will become active on the next IPDS host session.
If the printer IPDS Timeout is NOT set to “Host Controlled” (Menus > Option Card Menu > IPDS
MENU > EMULATION > IPDS Timeout = “Host Controlled”), power the printer OFF and ON to
activate the new settings. For more information on IPDS Timeout, see page
29.