Printer User Manual
Table Of Contents
- Introduction
- Set Initial Conditions (SIC) Command
- IBM Emulation Mode Printer Commands
- Control Codes
- Escape Sequences
- Printer Command Parameters
- Command Structure
- Printer Command Quick Reference (IBM Emulation Mode)
- Selecting a Character Set
- Select Code Page
- Print From Code Page
- Download a Character Set
- Select Global Font
- Select Print Type Style
- Set Print Quality
- Graphics Print Modes
- Horizontal Movement
- Line Control
- Vertical Tabulation
- Line Spacing
- Set Top of Form and Page Length
- Printer Control
- Epson Emulation Mode Printer Commands
- OKI Microline Emulation Mode Printer Commands
- Using the Printer Interface
- Downloading Characters and Fonts
- Barcodes
- Code Pages
- Glossary
- Index
Section 8: Barcodes
184
Example:
• Barcode data and other print data (for example, text data) are controlled
independently. It is necessary to provide sufficient horizontal space for the
barcode when mixing barcodes with other data, otherwise, the text and
barcode data will overlap, as shown in the following example:
Example:
<x
1B5B66 - barcode setup command prefix
0600 - setup data length (low byte
first) - x0006, 6
B4 - barcode type = Code 39
00 - module width = default
00 - space width adjustment = default
5000 - height (low byte first) - x0050
= 0.037 inches
00 - control byte
1B5B70 - barcode data transfer command
prefix
0400 - data transfer length (low byte
first) - x0004, 4
30 33 39 32 - data string "0392"
0D0A0A0A0A0A0A
- 1 carriage return and 6 line
feeds
>
<x1B5B66 0600 B4 00 00 3804 00>
Barcode Print Sample: <x1B5B70 0300> 395 Text Printing
<x0A0A0A0A0A>
Barcode Print Sample: