Assembly Manual

05/02/2017
ASSEMBLY INSTRUCTIONS
732-966 Vernay Console Table Skid Removal
***This console table is packed with skids attached to retain stability during
shipping. Before using the table, follow the below steps to remove the skids.***
Bolt
Allen Wrench
Skid
Leveler
Console Table
Flat Washer
1. Place console table upside-down on clean, flat, non-marring surface.
2. Use Allen Wrench to remove bolts and flat washers in each skid.
3. Insert provided adjustable levelers into holes in bottom of each leg. Twist levelers until tight.
Refer to separate instructions for adjusting levelers.
For additional consumer assistance please contact your Lexington dealer or call our
Consumer Services Department at 1-336-474-5300, Monday-Friday, 8-5 Eastern.