User Manual

12 MPX Native Reverb

Step 4 – Select the desired preset

Now that signal is properly routed and initial levels set, play the session and listen to

the reverb effect. If it doesn't sound like the right type of effect for the task at hand,

select a different preset. If no presets in the currently selected category meet your

requirements or you know what you are after, select a different category and audition

the presets within that category.

Repeat until you have found the

preset which works best for the

material you are working on.

Step 5 – Adjust the rotary parameters (optional)

If you are happy with the way the effect sounds, move on to the next step. If you think

the effect still requires some additional tweaking, audition the audio while adjusting

the parameter knobs until you have reached the desired effect.

Note: Only readjust the Mix knob if you require more or less of the reverb effect

and you inserted the MPX Plug-In on the source track (for single track processing),

as described in step 2. If you conﬁgured the MPX Plug-In to process multiple tracks,

as described in step 2, you can ﬁne tune the reverb level in the mix by adjusting the

fader on the reverb aux channel, if required.