User Manual
15
Room Control
Most of the Room algorithm’s parameters are self-explanatory, and you can find their
descriptions starting on page 38. Here are a few parameters unique to this algorithm:
Early
Predelay
Reverb
Predelay
Room
Scale
Bass
Xover
Bass
Boost
Select room
impulse category
Select
impulse
Normal/Reverse
impulse
Click Room
Predelay
You will notice that there are two predelay parameters:
• Early Predelay
Is an overall predelay that delays all of the signal. As with a more typical reverb, it’s often
used to create some separation between the wet and dry portions of the signal.
• Reverb Predelay
Is an additional delay that comes between the room impulse and the reverberation sec-
tion. It can have a large effect on the perception of size and/or liveness. A small value
means that reverb will begin while the room impulse is still being output. A larger value
will delay the reverb until nearer the end of the room impulse. An even larger value will
create actual separation and may be perceived as a slapback.