User Manual

3. Click on Record and record the second (overdubbed) track.

B. RECORDING A GUITAR USING THE INSTRUMENT INPUT

This section explains how to record using the ¼" Instrument input jack on the front

panel.

1. Plug your electric, acoustic, or bass guitar into the Instrument input jack on the

front of the Lambda Studio™ hardware.

Instrument Jack

The Instrument input uses the same recording channel as the Line 1 input;

anything plugged into the ¼" Line 1 input jack on the back of the Lambda

Studio will not be recorded when a cable is connected to the ¼" Instrument

input jack on the front panel.

NOTE: This jack is intended for electric guitar and bass, or acoustic instrument

pickups, not line-level signals such as the output of keyboards or a direct out from

a guitar amplifier. For those, use the Line 1-2 input jacks on the back of the

Lambda Studio hardware.

2. Press the Monitor Assign button between Line 1 and Line 2 knobs so that it

is in the Mono position.

Monitor Button

3. Open Cubase LE 4, go to File and select New Project>Default, and a project

location. (See Section I for more information.)

To set the input of the track to record from the 1-2 USB channels:

1. Click anywhere in the gray area (not on the buttons) of the Track 1 window

Recording a Guitar Using the Instrument Input