Operating Instructions

pack. The SyncMan installation menu will start automatically. Follow the
screen prompts to install the software.
1. Connect the cable, included with your unit, to a free PC Com Port then insert
cable jack into the unit’s socket (on top left side)..
2. Start SyncMan
®
software on your PC and check whether synchronisation
mode is set up for TM230 Series Personal Assistants by clicking on Tools,
Options then Your Device tab.
3. Set up PC Com Port in SyncMan
®
by clicking on Tools, Options then
Synchronisation tab. Make sure also that automatic connection is
ticked off.
Perform synchronisation
1. Once SyncMan
®
has been started and your unit connected to your PC,
press once to display home ( symbol on first line).
2. Press to start Synchronisation. Alternatively you can press MENU then
select PC SYNCH. option and press .
3. Display shows LINKING … During synchronisation.
If you have set up a password, you will be required to enter it at this time to
perform synchronisation.
21. Lexibook SYNCMAN
®
software
SyncMan
®
UPGRADE downloading
1. Go to https://my.lexibook.com web site and register as new member.
2. You will get by return an activation e-mail to make your account active. Click
on the activation link included in this e-mail.
3. Then go back to https://my.lexibook.com and enter your user name and
password, this will take you to your account home page, you will find a link
to download Lexibook SyncMan
®
upgrade software free.
Required PC configuration
Your PC must have following configuration to run Lexibook SyncMan
®
software properly :
• Windows
®
95, 98, Millennium, 2000 & XP or Windows NT
®
4.0 .
• Microsoft
®
Internet Explorer version 5.0 or above.
• 32MB RAM (for Internet Explorer).
17. Unit conversion
Perform a conversion
1. Press four times. First unit conversion is displayed inch cm with its
conversion rate 2.54. There are 8 pre-stored unit conversions.
2. Press or arrows to select desired conversion. Ex : mile km
3. Tap amount to convert.
If it is a mile amount, press to view km result.
If it is a km amount, press to view mile result.
Available unit conversions:
inch cm (inches and centimeters) ; yard m (yards and meters) ;
mile km (miles and kilometers) ; C F (Celsius and Fahrenheit) ;
ft m (feet and meters) ; oz g (ounces and grams) ; lb kg (pounds
and kilograms) ; gal l US (US gallons and litres) ; gal l UK (UK
gallons and liters)
18. Reset
This operation will delete all your data and your password.
1. Insert a blunt pin, such as an opened paper clip, in RESET hole at the rear of
the unit and press gently Display shows RESET?
2. Press to confirm or any other key to escape.
19. Memory check
1. Press once to view home time ( symbol on first line).
2. Press to display numerical keypad and there press MENU. LANGUAGE ?
option is displayed.
3. Use or arrows to select MEMORY CHECK and press to confirm.
4. Display shows how many free bytes are left then returns to home time.
20. PC Synchronisation
Before synchronising
Prior to performing your first synchronisation, make sure that Lexibook
®
SyncMan
®
software is installed on your PC. Insert the CD included in your
GB 6