Introduction Manual
Check Outside Temperature & Humidity
1. Press CHN [4] to toggle between the data of your various remote sensors: Outside 1 (channel 1),
Outside 2 (channel 2) and Outside 3 (channel 3). T
emperature and humidity readings will alternate on
the receiver.
Note: if you do not have any additional sensors, please disregard this function.
°C or °F T
emperature Display
2. Toggle between °C and °F by pressing Snooze [5] in Clock 2 mode.
Min and Max T
emperature & Humidity
3. Press MINUTE/- [3] in Clock 1 mode to display minimum temperature and humidity records.
4. Press HOUR/+ [2] in Clock 1 mode to display maximum temperature and humidity records.
Display HI & LO
"Hi" and "Lo" displayed onscreen mean that the temperature or humidity is outside the range of
specification.
Inside/ Outside Temperature Humidity Display
Inside > +55°C > 95%
HI
Inside < -20°C
< 15% LO
Outside > +70°C > 95%
HI
Outside < - 30°C
< 15% LO
Copyright © Lexibook 2006
SM1760IM0036 GB11
English
English
11
1
2
3
4
5
1
2
3
4
5
6
TEMPERATURE & HUMIDITY TREND
TEMPERATURE ALARM
Copyright © Lexibook 2006
SM1760IM0036 GB12
12
The trend indicator shows the trend of temperature & humidity determined by the particular sensor in
the past half hour interval.
Arrow
Indicator
Trend Rising Steady Falling
You can set high temperature or low temperature alarms for one local channel and for one remote
channel.
Local temperature alarm
Scroll to temperature alarm mode by using MODE (Inside).
The default value 14°C or existing preset will flash.
Press Hour/+[2] or Minute/– [3] keys to set the temperature limit value.
Press Snooze [5] key continuously to scroll and select the high temperature alarm ,
low temperature alarm or disable the alarm function (blank).
Press mode [1] to save your settings.
Outdoor temperature alarm
Scroll to remote channel temperature alarm mode by using mode [1].
Press CHN [4] to select the channel of the desired transmitter.
The default value 14°C or existing preset will flash.
Press Hour/+[2] or Minute/– [3] keys to set the temperature limit value.
Press Snooze [5] key continuously to scroll and select the high temperature alarm ,
low temperature alarm or disable the alarm function (blank).
Press mode [1] to save your settings.