User's Manual

User Manual
Item: #20003 - Tealight
Smart Color & Tunable White
WELCOME TO LEXI
USER GUIDE
OPERATION
1. In order to add new devices to your
Lexi Mobile App, first follow the
instructions for connecting your Lexi
Portable Hub to your wireless network.
2. Power on your light(s), you'll see the
light(s) flashing with cool white color
3. Select "ADD NEW DEVICE" on the LEXI
Mobile App and follow the instruction to
complete adding the light(s). During this
process you'll see the light transition to
warm white flashing as it goes through
the association process until it stops
flashing and remains on warm white
color.
4. Your light has been added to the LEXI
Mobile App successfully and ready to
use.
5. Remember to pair the Tealights one by
one to the LEXI Mobile App so that they
can be individually controlled afterwards.
6. To learn more about detail function
and special effect, Please go to
www.lexidevices.com
CHARGING THE Tealight
1. Turn on the switch under the Tealight.
(You may see the light is flashing with
white color, this is the normal state when
the light has not been paired)
2. Plug-in the Tealight(s) to the 3.5mm
connector on the Charging Base.
3. Connect the DC 5V 1A adapter, plu
g
-in
the 3.5mm connector to the socket at the
side of Charging Base. During charging
the Tealight will be light-up with red.
4. Char
g
e for approximately for 6-8 hours.
The Tealight will turn green when fully
charged.
5. Take out the Teali
g
ht from the Char
g
in
g
Base, and turn off the candle li
g
ht to save
power.
6. During charging, make sure the On/Off
switch is located at On position.
7. Durin
g
char
g
in
g
the Teali
g
ht cannot be
controlled by the LEXI Mobile App.
WARNINGS AND CAUTIONS:
- This is an artificial candle. Do not light
the Tealight with fire.
- Keep away from liquids and humidity.
- The product is for indoor use only. Do not
use in wet locations, directly exposed to
water or outdoors.
- This product is not a toy designed to be
played with by children.
- Do not place on hot surfaces.
- Do not be exposed to extreme
temperatures, direct sunlight and
moisture.
- For safety reasons and under the terms
of the warranty, none of the enclosed
devices should be opened.
- Only use the adapter supplied: using a
different adapter can damage the
product.
WARRANTY:
LEXI provided one-year warranty is valid if
the product is used in accordance with
the instructions and for its intended
purpose. Claims will only be accepted on
submission of the original proof of
purchase (invoice, sales slip or receipt)
stating the purchase date, the name of
the dealer and a description of the
product with product ID labeled at the
products.
The LEXI’s warranty lapses if:
a. Anything has been changed, crossed
out, deleted or rendered illegible on the
purchase docket or product description.
b. The failure is caused by dama
g
e, faulty
connections or abuse.
c. A defect is caused by extreme
circumstances not inherent to the
product, for example, lighting, flooding,
fire, incorrect use or negligence.
d. The product has been opened or
disassembled.
e. usin
g
a different adapter other than we
provided
TROUBLESHOOTING
- Ensure your device is within 45 feet of
the Lexi Portable Hub without obstacles
- Check the On/Off switch is located at
On position (even at charging)
- Make sure the light is charged.
- Confirm your smart phone is paired with
LEXI Portable Hub
- To un-pair the lights turn the light on/off
6 times in quick succession using the LEXI
Mobile App. Afterwards, you'll see a cool
white flashing. ( A warm white will be
flashing at the 5th power cycle which is a
warning signal for you. If you don't want
to un-pair it, stop the power cycle. The
light will go back to the last state). Then,
re-pair this light in the User Guide section.
WIRELESS SPECIFICATION:
BLE Frequency: 2402-2480MHz
Wireless communication protocol: IEEE
802.15.4
Channel: 0 -39 channels
ENVIRONMENTAL SPECIFICATION:
Temperature (operation): -5...40°C
Temperature (storage): -25...60°C Relative
humidity: 5-90% non-condensing
CLEANING AND MAINTENANCE:
Do not clean when the product is on and
connected to mains power. To avoid
scratching, the product should only be
cleaned with a soft dry cloth. Do not use
cleaning agents.
PLEASE KEEP THIS PACKAGING FOR FUTURE
REFERENCE AS IT CONTAINS IMPORTANT
INFORMATION.
DISPOSAL OF YOUR OLD PRODUCT:
Your product is designed and
manufactured with high quality materials
and component, contains non-
removable Lithium-Ion battery, which can
be recycled and reused. When this
crossed-out wheeled bin symbol is
attached to a product it means the
product is covered by the European
Directive 2002/96/EC.
Please find out for yourself about the
local separate collection system for
electrical and electronic products. Please
act according to your local rules and do
not dispose of your old products with your
normal household waste. The correct
disposal of your old product will help
prevent potential negative
consequences for the environment and
human health.
FCC WARNING AND CAUTION:
- This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
- Changes or modifications to this unit not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate the
equipment.
FCC ID : 2ATOT20003
- Shielded Cables must be used with this
unit to ensure complaince with the Class
B FCC limits
NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference in
a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if
not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
- Reorient or relocate the receiving
antenna.
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.