User Manual

19
13. Troubleshooting
I cannot hear anything!
// Check if phantom power (P48) is switched on. A condenser microphone always needs to be supplied
with 48V phantom power to work.
// Check your whole signal chain one by one and check if all connected equipment is supplied with
sufcient electrical power.
// Check if your audio interface, mic-preamp, or other subsequent equipment receives an input signal.
// Check if all cables are well connected and functional.
My signal sounds distorted, what can I do?
// Check and adjust input gain on your audio interface, mic-preamp, or other subsequent equipment –
always make sure you leave sufcient headroom.
// Plosives sounds during vocal recordings can overload the capsule – use the supplied pop lter and/or
keep a greater distance between source and microphone.
// Structure-borne noise – use the supplied shock mount.
My recording sounds mufed!
// To record with full sensitivity do not cover any part of the wire mesh.