Manual

Rev F www.lmtdefense.com Page

FUNCTIONING

After stripping and reassembly of the weapon, the user must always carry out the function test to ensure that

all operations will function properly. Tilt the weapon over to the left. Look into the ejection opening port

ensuring the front face of the bolt and the chamber are clear from ammunition or obstructions.

Cock the weapon, rotate the fire selector lever to “Safe” and attempt to fire off the action. It must not fire.

Rotate the fire selector lever to “Fire”.

Rotate the fire selector lever to “Auto”.

• Operate the trigger but do not release the trigger. The hammer should rotate forward about its axis

under influence of its spring.

• Ensure the trigger is not released. Cock the weapon. The hammer should be retained to the rear by

the disconnector. Release the trigger. The hammer should be heard / felt to disengage from the

disconnector to be immediately retained by the sear.