Manual

Rev F www.lmtdefense.com Page

• Slide the firing pin out of the rear of the bolt carrier.

7.62x51mm/308 Win 5.56x45mm 5.56x45mm

• On the 7.62x51mm/308 Win bolt carrier, rotate the bolt into the locked position and lift the cam pin out

of the carrier. On the 5.56mm direct gas and piston operated bolt carriers rotate the bolt to the locked

position. Rotate the cam pin ¼ of a turn and remove it from the bolt carrier

7.62x51mm/308 Win 5.56x45mm Enhanced bolt and carrier

• The bolt can now be Remove the bolt from the carrier.

• Holding the bolt in one hand you can push out the Extractor Pivot Pin slightly with the Firing Pin

Retainer Pin or a suitable tool. Once the Extractor Pivot Pin is partially out, you can remove it by

pulling it with your fingers and remove the Extractor.