Manual

Rev F www.lmtdefense.com Page

• Pull the plug/operating rod from the gas block. The piston should come with the plug due to the high-

quality fit.

• The piston is easy to remove from the plug with gentle hand pressure.

REMOVING THE BOLT AND CARRIER ASSEMBLY

• Pull the charging handle to the rear. Remove the bolt carrier assembly from the upper receiver.

• Pull the charging handle fully to the rear, and disengage it from the upper receiver by moving it

downwards so the expanded end of the charging handle passes through the cut-out in the guide way.

7.62x51/308 Win Carrier 5.56x45mm Carrier

• Cup the bolt and carrier assembly in one hand and with a suitable drift or point of cartridge. Push out

the firing pin retaining pin. Note the 7.62x51mm/308 Win firing pin retainer pin is captivated and should

not be removed from the carrier.

Captive Firing Pin

Retainer Pin

Removable Firing

Pin Retainer Pin