Manual

Rev F www.lmtdefense.com Page
24
• From the left-hand side push the rear locking pin to the right. From the right-hand side, pull the rear
takedown pin until it comes to a positive stop.
• From the left-hand side push the rear locking pin to the right. From the right-hand side, pull the front
pivot pin until it comes to a positive stop.
•
• Separate the upper and lower receivers.
• With the hammer in cocked position, depress the buffer retainer. Remove the buffer and recoil spring.
• Rotate the selector lever to the “FIRE” position.
• With your free hand, hold the hammer, not allowing it to slam forward, and operate the trigger. This will
allow the hammer assembly to be released from the cocked position.