Operating Instructions

Q Read & Save These
Operating Instructions Instructions
Page 5 of 14
3.4 FRONT PANEL
3.4.1 LED
This LED has 3 colors: red, green, and blue. On startup, the LED flashes
blue. When startup is complete, the LED is lit solid green.
3.4.2 BUTTON
This button has several functions but is primarily used to group the
gateway to your existing Levven Controls device group.
3.4.3 RESET BUTTON
This button is recessed behind the plastic enclosure and can only be
pressed with a small object such as a paper clip or needle. It
3.5 DC POWER INPUT
Q’s included AC wall adapter will operate between 90 – 250 AC line
voltage with a line frequency of either 50 Hz or 60 Hz. There is no need to
convert or adjust the unit in any way.