User Manual

EN EN
10 11
CONTROLS
Note: You can also control these functions using
the VeSync app, as well as additional functions
(see page 16).
Power Button
•
Press to turn the humidifier
on/o.
• Press and hold for 5
seconds to pair with the
VeSync app. See the
VeSync in-app instructions
for more information.
• Press and hold for 15
seconds to reset the
humidifier. This will restore
the humidifier’s default
settings and disconnect it
from the VeSync app.
Sleep Mode Button
•
Press to turn Sleep Mode
on/o (see page 16).
Night Light Button
•
Press repeatedly to cycle
through night light settings:
50%, 100%, and O.
• Press and hold for 3
seconds to turn the display
and the night light o.
• Press and hold for 3
seconds during Sleep
Mode to turn Sleep
Mode o.
Mist Level Button
•
Press repeatedly (or press
and hold) to cycle through
mist level settings: Auto
Mode, Low, Medium, and
High. (For more details on
Auto Mode, see page 16.)
• Press during Sleep Mode
to turn Sleep Mode o.
The humidifier will keep
misting on Auto Mode.
GETTING STARTED
1. Remove all packaging.
2. Take the water tank o of the base and
remove all tape, including any tape on
the float. [Figure 1.1]
3. Choose a hard, flat location for the
humidifier at least 30 cm / 12 in away
from any walls. The surface must be
water-resistant. [
Figure 1.2]
4. Mist should be directed away
from walls, furniture, bedding, and
appliances. [
Figure 1.3]
Figure 1.2
Figure 1.1
Figure 1.3
30 cm /
12 in
30 cm /
12 in