User Manual

EN EN
20 21
6. To descale the humidifier:
a. Fill the tank with 710 mL / 3 US
cups of distilled white vinegar.
[
Figure 4.5]
b. Replace the tank cover and swish
the vinegar around the tank.
[
Figure 4.6]
c. Place the tank on the base and
soak for 15–20 minutes. Vinegar
will drain into the base chamber
and loosen scale (mineral buildup)
in the tank and in the base
chamber (including the transducer
and float). [
Figure 4.7]
d. Remove the tank, remove the tank
cover, and pour out any vinegar.
[
Figure 4.8]
Figure 4.5
Figure 4.6
Cleaning (cont.)
Figure 4.7
Figure 4.8
Figure 4.9
Figure 4.10
Figure 4.11
Figure 4.13
Figure 4.12
g.
Place the float and noise silencer
in a small container. Fill with
enough vinegar to cover them.
Soak for 15–20 minutes.
[
Figure 4.12]
f. Remove the float from the base
chamber by pulling up the larger
side of the float [
Figure 4.10] and
pulling the shaft out from the float
brackets. One side of the float
brackets is open (U-shaped) to
allow the shaft to be removed.
[
Figure 4.11]
h. Use a soft cloth and the included
cleaning brush to remove scale
from all parts. [
Figure 4.13]
e. Flip the tank over and remove
the noise silencer. To remove the
noise silencer, press the release
tab and gently pull away from the
humidifier. [
Figure 4.9]
Cleaning (cont.)