Warranty

5. Carefully set aside the salt crystal on a ﬂat and stable surface and remove the bulb from the base

socket, gently rotating it counter-clockwise.

6. Install a new C7 15W bulb, gently rotating it clockwise.

7. Gently slide the base back onto the crystal, making sure the screw slots and base pegs are

aligned.

NOTE: You may test to see if the screw slots and base pegs are aligned by attempting to twist the

base while in place. If the base doesn’t rotate, the crystal and base are properly locked in.

8. With a small screwdriver, reinstall the screws in each of the four outer slots, making sure they are

tightly screwed in.

9. Place the lamp on a ﬂat surface right side up, holding your hand under the base until placed

under the table so as to avoid the possibility of losing any loose screws.