Model: Elora Natural Himalayan Salt Lamp Questions or Concerns? Please contact us Monday - Friday 9:00am - 5:00pm PST at (888) 726-8520 or email support@levoit.
Thank You. Thank you for purchasing your Natural Himalayan Salt Lamp by Levoit. At Levoit, we believe your living space plays a key role in developing a happier and healthier lifestyle. Himalayan Salt Lamps create a soothing environment by emitting warm lighting and releasing negative ions into the air. Along with their holistic benefits, a Levoit Himalayan Salt Lamp adds style and an artisanal touch to your home.
Safety Information IMPORTANT: Please read, understand, and comply with all of the instructions provided in this manual before using the device. Failure to comply with the instructions given in this manual and/or using the device in ways other than the ones mentioned in this manual may result in serious injury and/or damage the product. Safety Use & Care • Keep out of reach of children. • The lamp is for indoor use only. Avoid exposure to high-temperature sources, direct sunlight and moisture.
Main Functions Function Diagram 1. 2. 3. 4. 5. 6. 7. 8. Salt crystal Lamp base Base screws Lighting control Base pegs Bulb Screw slots Power cord 3 NOTE: Each salt crystal is unique in shape and size.
Operation 1. 2. 3. 4. Place the salt lamp on a hard, flat surface. Plug the power cord into a powered socket. Tap the lighting control button to turn on the lamp. Press and hold the lighting control button to adjust the lamp brightness. Release at the desired brightness setting. 5. Press the power button once again to turn off the lamp. NOTE: The lamp will remember the last mode and brightness level when turned on and off; however, this memory function will not work if the power source is interrupted.
Lightbulb Replacement NOTE: It is best to complete this process seated at a table or nearby surface to place the small screws. 1. Unplug the salt lamp’s power cord. 2. Carefully flip over the lamp, supporting the lamp by the crystal. 3. With a small screwdriver, remove the four base screws, rotating counter-clockwise. NOTE: DO NOT remove the center screw. 4. Gently slide off the base while holding the lamp (upside-down or sideways).
5. Carefully set aside the salt crystal on a flat and stable surface and remove the bulb from the base socket, gently rotating it counter-clockwise. 6. Install a new C7 15W bulb, gently rotating it clockwise. 7. Gently slide the base back onto the crystal, making sure the screw slots and base pegs are aligned. NOTE: You may test to see if the screw slots and base pegs are aligned by attempting to twist the base while in place. If the base doesn’t rotate, the crystal and base are properly locked in. 8.
Cleaning & Maintenance • • DO NOT wash or clean with water or liquid detergents. • If not in use for a long period of time, store the lamp in a cool and dry environment, covering the crystal with a plastic bag. • The lamp may naturally moisten in humid environments. If used in a humid environment, keep the lamp lit for several hours for it to naturally dry out. • If the salt crystal becomes moist, gently pat down the crystal surface with a dry cleaning cloth.
Warranty Information Terms & Policy Levoit warrants all products to be of the highest quality in material, craftsmanship and service for a minimum of 1 year, effective from the date of purchase. Warranty lengths may vary between product categories. Levoit will replace any product found to be defective due to manufacturer flaws based on eligibility; refunds are available within the first 30 days of purchase.
Customer Support Should you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team. We’re here for you. Levoit Corporation 1202 N Miller Street, Suite A Anaheim, CA 92806 Toll-Free: (888) 726-8520 Email: support@levoit.com Support Hours Monday - Friday: 9:00am - 5:00pm PST *Please have your order confirmation number ready before contacting customer support.
www.levoit.
