Warranty

8
Use the Humidity Level
button to program a humidity
level for the humidifier.
Press the Timer button to
set the timer anywhere from
1 to 12 hours. When you have
selected your desired time,
the display will flash three times before the
time is set. The device will automatically
turn o when the timer is finished counting
down. To cancel or turn o the timer, keep
pressing the Timer button until the display
flashes “--.”
1. Press the Humidity
Level button once to
start programming. The
display will read “--.”
2. Keep pressing the
Humidity Level button to
select a custom humidity
level between 40%-80%
RH.
3. Once you have selected
your desired humidity,
the display will flash 5
times confirming your
selection.
5. The device will resume
operation when the
relative humidity drops
5% below the set
humidity value.
NOTE:
• The programmed humidity level can be
changed at any time by pressing the humidity
level button.
• The “Set Humidity” icon will turn on while you
are setting your humidity level and will turn o
once your humidity level has been confirmed.
• Once you have programmed your humidity
level, the display will alternate every 3
seconds between the programmed humidity
and the current humidity level during
operation.
4. The device will start
producing mist and
automatically stop
operating once the
programmed humidity
level has been reached.
FLASH 5x
6. To exit out of the
humidity level function,
press and hold the
Humidity Level button
for 3 seconds.