Warranty

8
Set-Up
1. Flip over the purifier to reveal the filter cover. Turn the
filter cover counterclockwise to the unlock position
and remove the cover.
2. Remove the filter from its plastic packaging. Reinstall
the filter with its pull tabs facing the opening. The
HEPA filter should be facing the opening. Place the
pre-filter on top of the HEPA filter.
3. Replace the filter cover on the air purifier, making sure
the arrows on the housing and filter cover align. Turn
the filter cover clockwise to the lock position to secure
the filters; the filter cover should snap shut on the
purifier.
4. Place the air purifier on a flat, stable surface. Connect
the purifier to an electrical outlet and the device
will chime, indicating that it is connected to a power
source.
NOTE:
• Always allow 15 inches of clearance on all sides of the
purifier.
• Ensure the air filter is properly positioned in the
purifier before use.
Tabs should face
the opening.
15 inches
OPEN
LO
CK