Use and Care Manual

21
Reassembling
1. Flip the water tank over and place
the noise silencer back into the tank.
[ Figure 4.20 ]
2. Place the water filter back into the tank
and rotate it clockwise to secure it in
place. [ Figure 4.21 ]
Figure 4.20
Figure 4.21
Figure 4.22
c. Place the larger prong into
the open (U-shaped) side of
the float brackets.
4. Refill the tank, if necessary.
5. Place the tank properly on the base and
place the tank cover on the water tank.
b. Insert the smaller prong into the
closed side of the float brackets.
[ Figure 4.23 ]
Figure 4.23
Storing
Follow the cleaning instructions (see page
16) and allow all parts to dry completely
before storing. Store in a cool, dry location.
3. Place the float back into the base chamber:
a. Make sure the correct side of the
float is facing up. [ Figure 4.22 ]