Use and Care Manual

12
USING YOUR SMART HUMIDIFIER
1. Plug in the humidifier. Press to turn
your humidifier on.
2. Tap repeatedly to cycle through mist
settings: Auto Mode, Low, Medium, and
High. [ Figure 3.1 ]
3. Rotate the nozzle to adjust the direction
of the mist. [ Figure 3.2 ]
4. Optionally, use the controls to activate
Sleep Mode, turn the night light on/o,
and more (see Controls, page 7).
5. When your room has reached your
preferred humidity level, turn the
humidifier to a lower setting, or turn it
o. A healthy humidity level is between
40% and 50%. [ Figure 3.3 ]
6. Press to turn your humidifier o.
Figure 3.1
Figure 3.2
Figure 3.3
Note: If there is no water in the tank or the tank is
removed, the humidifier will stop misting, will
flash 10 times, and the humidifier will turn o. Refill
the tank and properly place it on the base to use
your humidifier.
Note: Using the VeSync app allows you to control
your smart humidifier remotely and access additional
functions and features (see page 13).
Note: You can also use Auto Mode to keep the
humidity level between 40% and 50%.
Note: If there is no water in the tank, will flash
10 times, and the humidifier will turn o. Fill the
water tank (see Getting Started, page 8).
Note:
• The humidifier will not mist in Auto Mode
if the humidity level is above 50%. If
you want the humidifier to keep misting,
change the mist setting, or change the
Auto Mode settings in the VeSync app.
• For more information about Auto Mode,
see page 13.