Use and Care Manual

11
The plasma function uses PlasmaPro™
technology to generate positive and negative
ions that bind with pollutants and neutralize
them by breaking down their molecular
structure.
This helps neutralize particulate matter,
odorous gases, aerosols, and volatile organic
compounds (VOCs).
The VeSync app allows you to access
additional smart air purifier functions,
including those listed below. As the app
develops, more features may become
available.
Remote Control
• Change any air purifier settings
through the app, even while Display
Lock is on.
Air Quality Updates
• View real-time PM2.5 updates in the
app.
• See your air quality history for the
previous week.
Auto Mode
• Access additional Auto Modes: Quiet
Auto Mode and Ecient Auto Mode.
• Quiet Auto Mode uses medium fan
speed instead of the high or turbo
fan speeds, even when the air quality
is poor, to avoid making too much
noise.
• Ecient Auto Mode lets you choose
the size of the area you want to
purify. The air purifier will use the
highest fan speed (turbo) to clean the
air for a designated amount of time.
This time is based on ACH 1 and the
size of the room, meaning how long
it takes for the air purifier to clean
all the air in your room one time,
regardless of the air quality. After this,
the mode will adjust the fan speed
according to the actual detected air
quality in the room.
Plasma Function
VeSync App Functions
USING YOUR PURIFIER (CONT.)
The air purifier is in Standby Mode when it is
turned o, but plugged in.
Note: Display Lock can be used while the
air purifier is in Standby Mode to keep
the air purifier from being turned back
on. The laser dust sensor will still detect
the surrounding air quality and give you
updates in the VeSync app.
Note: Ecient Auto Mode is useful for
purifying odors from the air. The air purifier’s
sensor can only detect particles in the
air, not smells. Ecient Auto Mode does
not rely on the sensor, but the room size
instead.
When the air purifier is plugged in and turned
o, it will remember its previous fan speed,
Sleep Mode, Auto Mode, Display Lock,
Display O, and Plasma settings.
When you unplug the air purifier, it will only
remember its previous fan speed, Sleep
Mode, and Auto Mode.
Note: The air purifier will remember the last
timer setting chosen (1–12 hours), but it will not
automatically resume the timer. You will need
to restart the timer after the air purifier is turned
back on.
Note: You cannot use the plasma function
during Sleep Mode.
Memory Function
Standby Mode