US E R MANUAL Smart Ultrasonic Top-Fill Cool Mist Humidifier Model: Classic 300S Questions or Concerns? Please contact us at support.eu@levoit.com.
Package Contents Table of Contents Package Contents Specifications Safety Information • General Safety Getting to Know Your Smart Humidifier Controls Getting Started • Filling & Refilling VeSync App Setup Using Your Smart Humidifier • Sleep Mode • Auto Mode • VeSync App Functions • Important Tips • Using the Aroma Box Care & Maintenance • Cleaning • Cleaning the Aroma Pad • Reassembling • Storing Troubleshooting VeSync App Troubleshooting Warranty Information Customer Support 2 2 3 3 4 6 7 8 10 11 12 12 1
G E T T I N G TO K N O W YO U R S M A R T H U M I D I F I E R A. B. C. D. E. F. G. H. I. J. Nozzle Water Tank Cover Dust Cover Mist Tube Water Tank Night Light Base Display Cleaning Brush Max Water Line (Tank) K. L. M. N. O. P. Q. R. S. T. Water Tank Handles Power Cord Float Float Brackets Aroma Box Aroma Pad Max Water Line (Base) Secondary Float Transducer Air Outlet U. Air Inlet V. Humidity Sensor W. Feet X. Water Outlet Valve Y. Night Light Cover Z. Noise Silencer AA.
CONTROLS Note: You can also control these functions using the VeSync app, as well as additional functions (see page 12). Power Button • Press to turn the humidifier on/off. • • Press and hold for 5 seconds to pair with the VeSync app. See the VeSync in-app instructions for more information. Press and hold for 15 seconds to reset the humidifier. This will restore the humidifier’s default settings and disconnect it from the VeSync app.
Filling & Refilling 1. Remove the water tank cover by holding the nozzle and pulling upward. [Figure 1.4] Filling & Refilling (cont.) Note: • We recommend using purified or distilled water to fill the tank. • Do not fill past the tank’s max water line. 3. Replace the water tank cover and place the tank back on the base. [Figure 1.9] Note: Make sure the nozzle on the water tank cover is placed over the mist tube, or the humidifier may not work correctly. [Figure 1.
VESYNC APP SETUP U S I N G YO U R S M A R T H U M I D I F I E R Note: Due to ongoing updates and improvements, the VeSync app may be slightly different than shown in the manual. In case of any differences, follow the in-app instructions. Note: Using the VeSync app allows you to control your smart humidifier remotely and access additional functions and features (see page 12). 1. 1. To download the VeSync app, scan the QR code or search “VeSync” in the Apple App Store® or Google Play Store. [Figure 2.
Sleep Mode VeSync App Functions Important Tips Sleep Mode changes the humidifier’s mist setting to Auto Mode, turns off the display lights, and turns off the night light. The VeSync app allows you to access additional smart functions, including those listed below. Your humidifier must have the correct level of water in the base chamber to work properly. If there is too much water in the base chamber, the humidifier cannot create mist.
Using the Aroma Box Your humidifier can be used for aromatherapy. 1. Push the aroma box at the back of the base and pull it out. [Figure 3.7] CARE & MAINTENANCE 3. Place the aroma box into the humidifier. Note: 4. Turn on the humidifier. The humidifier will automatically diffuse aroma when used. • All maintenance should be done on a waterresistant surface, such as a kitchen counter. • Change the water daily to avoid bacteria growth. • Use a tissue or cloth to clean the nozzle regularly.
Cleaning (cont.) Cleaning (cont.) 6. To descale the humidifier: a. Fill the tank with 710 mL / 3 US cups of distilled white vinegar. [Figure 4.5] c. Place the tank on the base and soak for 15–20 minutes. Vinegar will drain into the base chamber and loosen scale (mineral buildup) in the tank and in the base chamber (including the transducer and float). [Figure 4.7] e. Flip the tank over and remove the noise silencer.
Cleaning (cont.) i. Rinse all parts until any vinegar smell is completely gone. [Figure 4.14] Cleaning the Aroma Pad 1. Press the aroma box to release it from the base, and pull it out. [Figure 4.15] 3. Dry with a clean cloth and place it back into the aroma box. [Figure 4.17] Figure 4.15 Figure 4.17 Figure 4.14 7. 2. Remove the aroma pad and rinse under warm, running water. [Figure 4.16] Note: Do not pour liquid cleaners or detergents into the aroma pad or box. Dry all parts with a cloth.
Reassembling 1. Flip the water tank over and place the noise silencer back into the tank. [Figure 4.18] T R O U B L E S H O OT I N G b. Insert the smaller prong into the closed side of the float brackets. [Figure 4.20] Problem Possible Solution Plug in the humidifier and turn it on. Humidifier doesn’t turn on, or turns off unexpectedly. Add purified or distilled water to the water tank. Check to see if the humidifier is in Auto Mode.
TROUBLESHOOTING (CONT.) Problem Possible Solution Make sure the water tank is properly in place (see Getting Started, page 7). Set mist level to a lower setting. Humidifier makes a loud or unusual noise. Empty the base chamber. Refill the water tank (not the base chamber) and place the water tank properly onto the base. The humidifier may be malfunctioning. Stop using the humidifier and contact Customer Support (see page 24). White dust appears around the humidifier.
WA R R A N T Y I N F O R M AT I O N N OT E S Arovast Corporation warrants all products to be of the highest quality in material, craftsmanship, and service for 2 years, effective from the date of purchase to the end of the warranty period. Warranty lengths may vary between product categories. If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.
N OT E S 26 N OT E S
levoit.
