Cut Sheet

ManualsBrandsLeviton ManualsElectricalInjection Molded Mini Splice Tray, Gray

COMPONENT SPECIFICATIONS

T5PLS-12F T5PLS-24F

12- & 24-Fiber Injection Molded Splice Trays

T5PLS-12F T5PLS-24F

APPLICATION

Leviton’s Injection Molded Plastic Splice Trays provide

protection and slack management of heat shrink fusion

spliced bers (up to 12 or 24 bers) inside of a ber

enclosure. Available in 12-ber Mini and 24-ber High

Density versions, both trays accommodate 250 or 900µm

ber and feature a clear cover for viewing and inspection

of tray contents.

SPECIFICATION

The ber splice trays shall be offered in mini and

high density versions with removable clear covers for

viewing and inspection of bers. Incoming ber shall be

secured utilizing a ratchet action foam rubber padding

clamp feature or tie-down points to minimize crushing of

ber. The trays shall accommodate slack management of

both single-mode and multimode 250 or 900µm ber and

protection of (up to) 12 or 24 ber heat shrink style fusion

splices. Heat shrink splice sleeves shall be included.

FEATURES

• Four ratchet action clamps with foam rubber padding to

minimize crush of loose tube or tight buffer ber

• Clear cover allows viewing or inspection of bers

without having to remove cover

• Multiple tie down holes for securing incoming ber

• Accepts up to 12 or 24 heat shrink style fusion spliced bers

• Splice sleeves included

• Mounting hardware sold separately

• Accommodates standard heat shrink sleeves in 40 or

60mm lengths

DESIGN CONSIDERATIONS

• Use for single-mode or multimode ber

• Durable injection-molded plastic trays and covers

• Center hole for mounting of tray

• 12- and 24-ber splice trays installable in Leviton Opt-X

Series and LightSpace™ CPC/CPS Wall Mount enclosures

• 12-ber Mini splice trays installable in all Leviton Network

Interface Device (NID) enclosures

PHYSICAL SPECIFICATIONS

Dimensions: See page two

Materials: G.E. Noryl E190 UL94 VO Rated

WARRANTY INFORMATION

For a copy of Leviton product warranties, visit www.leviton.com.

Leviton Network Solutions, a division of Leviton Mfg. Co., Inc.

2222 - 222nd St. SE Bothell, WA 98021 Tech Line: 1-800-722-2082 Fax: 1-425-485-9170 www.leviton.com

Page 1 of 2

Summary of content (2 pages)

PAGE 1
COMPONENT SPECIFICATIONS T5PLS-12F T5PLS-24F 12- & 24-Fiber Injection Molded Splice Trays FEATURES Leviton’s Injection Molded Plastic Splice Trays provide protection and slack management of heat shrink fusion spliced fibers (up to 12 or 24 fibers) inside of a fiber enclosure. Available in 12-fiber Mini and 24-fiber High Density versions, both trays accommodate 250 or 900µm fiber and feature a clear cover for viewing and inspection of tray contents.
PAGE 2
COMPONENT SPECIFICATIONS T5PLS-12F T5PLS-24F ELECTRONIC FILES For CAD files, Typical specs, or Dimensional Line Art. (.DXF, .DWG, MS-DOS.eps or .TXT), visit www.leviton.com. T5PLS-12F T5PLS-12F T5PLS-24F T5PLS-24F NOTE: Images not to scale. PART NUMBERS Description Part No.