Instruction Manual

JCC Lighting Products Ltd. Innovation Centre, Beeding Close, Southern Cross Trading Estate, Bognor Regis, West Sussex, PO22 9TS, United Kingdom
Technical Support: [phone] Customer Services: [phone]
BS EN ISO9001 - 2015 - Registered Firm Certificate No. GB 1552
company
a
Square Solar Bollard
Replacement of Batteries:
1 x SPR017001- 1 x 3.7V 18650 2200mAh Lithium battery
Remove the two screws with a
screwdriver indicated above to release
head from the body
Remove the bracket securing the
battery, disconnect the battery and
remove from the head unit
Connect replacement battery and t
into head unit and ret the bracket
to secure the battery
Ret the head unit into the body, align
the holes in the body and head unit then
secure using the screws
Please hand in the non-working battery
to an appropriate waste disposal centre,
do not dispose of with household waste
Remove the head from the body
and lay upside down on a protective
cover to protect the solar panel
1. 2.
3. 4.
5. 6.
Prior to use after replacing the battery, ensure that the product is fully charged.
Please refer to point 2 in the installation instructions.