Specification

Leviton Manufacturing Co., Inc. Global Headquarters
201 N. Service Rd. Melville, NY 11747-3138 Tech Line: 1-800-824-3005 Fax: [phone]
Leviton Manufacturing Co., Inc. Energy Management, Controls and Automation.
4330 Michoud Blvd., New Orleans, LA, 70129 Tel: [phone] Fax: [phone]
Visit our Website at: www.leviton.com/emca
©2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
SGI65 In-Wall Speakers
Spec-Grade
®
PRODUCT DATA
SGI65 In-Wall Speakers Powered by Spec-Grade
®
When the specs call for quality sound, rely on
Leviton’s award-winning* Spec-Grade Sound™ indoor
and outdoor speaker line for exceptional technical
innovation and value. Spec-Grade Sound speakers
deliver features and performance comparable to
higher-end brands, at a price that’s right for the
entire range of the residential installation and
construction business.
All of Leviton Spec-Grade Sound™ indoor speakers
incorporate exceptionally strong, light and rigid
AeroNylon tweeters and Kevlar®-composite woofers
for exceptional clarity, detail and impact, along
with built-in AutoSurge™ protection to help protect
the speakers from possible damage due to over
driving. The outdoor/utility speaker is constructed of
weather resistant materials inside and out for years
of use in challenging environments.
*Electronic House Magazine “Product of the Year”
APPLICATIONS
In-Wall Speakers
In-wall speakers oer a no-compromise choice for
installed systems by projecting sound directly into
a listening area from a horizontal location just like a
shelf or floor speaker system.
They are a perfect solution for: 1. Primary listening
systems: musical applications where sound quality
is most important and wall locations do not conflict
with room aesthetics. 2. Installed home theater
systems: as front left and right speakers, and as
surround speakers.
FEATURES AND BENEFITS
(In-Wall Models)
• Kevlar® composite woofer – Woofer construction
combines exceptional rigidity and lightness to
provide the perfect linear movement needed
to reproduce dynamic, tight bass and incisive
midrange frequencies
• AeroNylon tweeter diaphragm – Aerospace-grade
nylon tweeter diaphragm combines very low
mass and high tensile strength to provide crystal-
clear treble response and exceptionally accurate
tracking of even the most challenging musical
transients
• AutoSurge™ circuit protection – Built-in AutoSurge
protection responds to potentially destructive
power peaks automatically and resets after the
event, helping prevent speaker damage
• Advanced phase/time alignment guide –
A precise phase/time waveguide is used to properly
align sound without mis-aligning the tweeters – a
problem with many adjustable in-wall speakers – in
order to provide extremely accurate stereo imaging
• Precision dividing network – The dividing network
(or crossover) used in all Spec-Grade Sound
speakers is made of high-spec components to
ensure total audio signal electronic integrity up to
the last microsecond before the signal is converted
into sound
• Inert mounting frame with “dogleg” installation
• points – To eliminate any transmitted vibrations
that could color in-wall or ceiling sound quality,
Spec-Grade Sound speakers rely on a bae-frame
assembly incorporating higher-density plastics and
a series of adjustable “doglegs” to rigidly clamp the
speaker to the wall or ceiling material
• 6.5- Inch Two-Way In-Wall Loudspeaker
(Cat. No. SGI65-00W)
• Includes paintable white grille
• 6.5-inch Kevlar composite cone low-frequency
transducer
• .5-inch AeroNylon dome high-frequency transducer
with phase/time alignment guide
• 2-way balanced precision crossover network with
AutoSurge circuit protection
• Frequency Response: 50-20kHz +/- 3dB
• Sensitivity: 88.0 dB SPL @ 1Watt/
• 1 Meter