User Guide

Set Up Your Breakers

The next step is to name and assign

each breaker’s position. If you were

expecting a number other than 9, tap the

rescan button below.

Found 9 Breakers

My Awesome Load Center

AC 1

COLLAPSE

Bedroom

Attic 1

Bath 1 Lights

Kitchen

Shed

Empty Slot

Upstairs 2

Upstairs 1

• Once the breakers have been found, name

them and assign each a position. Tap the

‘Identify’ button to locate individual breakers.

• Breaker names and positions can be

changed/updated later.

If you don’t have an internet connection, you are done with the

Leviton Load Center conﬁguration. The Leviton Load Center can

be connected to the Data Hub at a later time, however, usage and

fault information will not be available until this is done.

WEB VERSION